Hands-on learning is one of the best ways to learn how to code. Coding robots can assist anyone, no matter their age. However, some robots may appeal to individuals with different expertise or aspirations. Therefore, it is critical to choose the correct robot kit regardless of one’s age.
You may be familiar with coding and have a specific project in mind. Alternatively, perhaps you’re seeking to help a young individual get started in their educational endeavours. As long as you have a set of goals, you only need a little assistance to discover the right equipment. So here are the 8 best Arduino robotics kits for programming.
List of the 8 Best Arduino Robotics Kit for Programming In 2022
What if you could build a remote-controlled robot that you could program to autonomously navigate a space? Sounds like the plot for a sci-fi movie doesn’t it? However, this is already a reality.
With the help of an Arduino, you can build your very own DIY robotics kit that enables you to program your robot to autonomously navigate a space.
Here are the 8 best Arduino robotics kits for people who want to learn programming for robotics in 2022.
1. ELEGOO UNO Project Super Starter Kit
This project kit includes everything you need to get started with Arduino.
There are several producers of Arduino kits, but Elegoo is one of the most popular. In other words, the Super Starter Kit assumes you don’t have anything else to round out your set and includes everything you need, from batteries to instructions. ELEGOO UNO Project Super Starter Kit also comes with a PDF guide. A total of roughly two-dozen lessons are included in this tutorial. So it’s off to a good start.
When you consider everything included in this kit, it’s a bit overwhelming. Apart from the controller board, it includes an LCD module, breadboard expansion board, joystick module, stepper motor driver board, ultrasonic sensor, power supply module, stepper, servo motor receiver, temperature and humidity module, DC battery, one jumper wire, USB cable, passive buzzer, potentiometer, tilt switch, 4-digit display and remote control, pair of RBG LEDs and 5 pieces of yellow green-blue and red LEDs. Unfortunately, the controller board is not included in the kit.
Photoresistor, thermometer, NPN transistor and female-to-male DuPont wire diode receiver are also included in the package. With all of that said, it’s clear to see why this is called the Super Starter Kit. Including the kitchen sink isn’t necessary because it has everything else. However, this is still one of the most cost-effective Arduino children.
The UNO board can be used for a million different electronic projects because of all the available components. All of these devices can be connected to the system by a variety of protocols, including Bluetooth, Wi-Fi and cellular networks, and USB and Ethernet. For example, uploading programs to the board via a USB cable connected to a PC. Users can then go on to design and build their own unique digital devices.
This kit is appropriate for children ages ten and up. If you’re not accustomed to working with your hands, this may be more daunting than building your robot. Even though it’s a little more cerebral, this kit isn’t less constrained. There is nothing complicated about the kit merely because it is more involved. LCD1602 modules, for example, use a pin header, which eliminates the requirement for hand-soldering the board. The power supply is a standard 9V battery, as this is an improved beginning kit. It’s quite easy to locate and replace.
- Includes a comprehensive tutorial CD.
- STEM educational robot car kit
- 24 easy-to-assemble module
- Line tracking
- 1-year warranty
2. Makeblock Educational Robot Kit
mBot is a 15-minute build that includes a construction guide and 3D step-by-step instructions.
After that, we’ve got the Makeblock mBot STEM robotics system. This is an improved model with more recent additions and improvements than its predecessor, and it has transformative features such as a 3-in-1 robot.
It’s a great way for kids to learn to code because it can be programmed with several functions. It can be put together in hours and is as easy as putting together construction blocks. Even though it’s touted as requiring about 45 minutes to build, it may take a few hours.
This Makeblock Me Auriga Board is compatible with the Arduino Mega 2560, the company’s trademark board. It’s possible to program the robot using the Arduino IDE, and the included building guide can help.
The robot can be customized to seem like a bird, hawk, or land invader, for example, by adding special build models like those.
- Designed for programming
- Rich tutorial
- Easy to build
3. Ubtech Jimu Robot Astrobot Series: Cosmos Kit
This kit includes everything you need to build three different robots: the AstroBot, the Rover, or the Astron, or to create your own cosmic JIMU Robot.
The UBTECH JIMU Astrobot Robot series is the next in line. With the use of a mobile app, this astronomy set teaches kids how to construct and code in the context of STEM education.
Altogether, there are 5 servo motors, 2 LED lights, and an all-in-one control box in the robot. The battery can be charged via USB. In addition, the sensor that comes with the Bluetooth speaker can be used to extend the range and functionality of the robot even more.
There is no better way to learn to code than using Blockly’s unique platform. Your robot can be programmed to pick things up, overcome obstacles, manage the light settings, make sound effects, establish a unique personality, etc.
With the Brickly coding challenges, you may compete against other coders and gradually improve your skills. For example, a more accurate model can be created with the help of 360-degree 3D animated building instructions.
Pose, Record Play, or PRP can be used to create bespoke actions for the robot. It has 387 snap-together parts, making it a wonderfully enjoyable toy. Both Android and iOS smartphones can use the free software.
- Control box
- 5 smooth motion robotic servo motors
- 2 LED lights
- infrared sensor
- Bluetooth speaker
4. ArcBotics Sparki Robot
Sparki is aimed at children in elementary school and upwards, educators looking for a simple introduction to robotics, parents searching for something affordable yet instructive and fun, and DIY enthusiasts.
As an all-in-one solution to educate students about robots and coding in middle and high school, Sparki has been adopted by more than 2000 leading middle schools, high schools, colleges, and STEM programs like Stanford and FIRST Robotics.
This course will teach you to program over 40 different electronic components, including an LCD and grippers for gripping objects. You’ll also learn to program line-following sensors and other maze-related features like remote control and speakers. Everything here is free and open source. Sparki’s board is built on Arduino, so you can customize it to fit your needs.
Professional educators have created open-source lessons. Robotics, coding, and electronics lessons for kids at all levels of expertise.
In addition to the remote control, a labyrinth following poster, a line following poster, a Sparki-fitted pen/pencil, USB cable, and a Bluetooth module, Sparki comes preassembled and ready to use right out of the box. There aren’t any additional excessive fees. If you ever need replacement components, we’re here for you.
Scratch-like drag-and-drop blocks, Arduino code (C/C++), and Chromebooks are just a few of the programming choices available on this platform. In the beginning, novices use coloured blocks to construct simple programs, then easily transition to Arduino code
- 10+ free lessons
- LCD display
- Open-source hardware
5. VKMaker Smart Robot Car
It includes all of the required components and instructions on DVD+R, which you will need.
This VKMaker robot vehicle kit is the most affordable Arduino starter kit. If you’re interested in understanding how an Arduino works, this is a good place to start with a less-than-ideal robot kit. While its drawbacks will be discussed later, its low cost makes up for some flaws.
The Arduino IDE is compatible with the VKMaker automobile kit’s UNO R3 board. A V5 shield and four tracking modules for obstacle avoidance are also included. Before you can start playing around with this robot kit, you’ll need to solder the components together.
When it comes down to it, the VKMaker falls short when it comes to offering clear instructions on how to assemble the robot kit. While tutorial videos and the Arduino community are always available, the manual does a terrible job explaining the procedure. Instead, you’ll find an Arduino test program on the CD that you can run straight on the UNO board to see how everything works. Of course, you’ll eventually have to create your code because that’s the whole point of the kit.
Suppose you can put together the VKMaker robot car kit. Because this kit’s wiring is more complex than others, you’ll better understand how electrical circuits work as a result. Even though this is a relatively inexpensive Arduino robot kit, it may still be intimidating.
- Easy to install
- Tutorial CD
- 4 tracking unit
- 51 control unit
- Easy-start-stop system
6. Freenove Quadruped Robot Kit
The Freenove Quadruped Robot Kit features an easy-to-expand design.
Few Arduino robot kits look as weird as this one, but that’s half of its appeal. Rather than a car or an upright humanoid figure, this robot kit takes the shape of an insect-like quadruple-armed creature. Assembling this robot and witnessing it come to life is more enjoyable by its unique appearance.
Despite its promise of being beginner-friendly, the Freenove robot kit includes everything you need to put it together. The assembly manual refers to all of the pieces, and they are all well identified. From GitHub, you can obtain the Arduino Mega 2560’s software, and it works perfectly with the board.
Because the robot can be controlled over Bluetooth using an Android smartphone, this robot kit is fun. The source code for the board is written in C. You can alter the code or create a new one from scratch. Make sure to recompile and upload the code again.
Sensors are conspicuously absent from this robot kit. The robot does include a few extension ports that can be utilized for sensor installation, but it’s not necessary if you’re going to control the robot fully. This lack of sensors is unfortunate because the robot kit isn’t exactly inexpensive.
On the other hand, this insect-like robot is fun to watch. So if you’re looking for a robot kit that will provide you with hours of fun crawling around on your own, go no further than Freenove.
- Multiple free ports
- 9V battery for the remote control,
- two 14500 3.7V rechargeable lithium batteries for the robot
- Compatible with Mac, Linux, Windows, and Raspberry Pi platforms
7. Elegoo Penguin Bot Biped Robot Kit
ELEGOO Penguin Bot is an Arduino-based robotic kit with a variety of impressive and intriguing abilities. It also offers DIY modification by creating different head masks and reprogramming.
The Penguin bot is another ELEGOO Robot Arduino kit that, when constructed, looks like a penguin. Beginner kids and hobbyists alike can use the Bot Biped robot kit to learn about STEM concepts.
The ELEGOO penguin bot is based on the DIY Arduino platform and comes with the promise of ELEGOO quality and good ratings and reviews.
As for the bot itself, it’s packed with useful functions like auto-follow, music player, and dancing. It can follow a single path, detect and avoid obstacles, and is operated through an IR remote. Using the Bluetooth app, you may control the robot’s singing, dancing, and movement.
The robot is available in various colours, including red, black, and clear. In addition, there are six delicate designs to choose from when it comes to headcovers or head masks.
As a parent, you’ll be able to teach your child how to write, program, and more with the help of easy-to-follow tutorials. The robot kit includes a CD with all of the necessary instructions.
Even adults may have a good time putting together and utilizing the robot. Everything you need to assemble and utilize the robot is included in the kit, including the servo motors, parts, and containers. In addition, a magnetic screwdriver and a few spare parts are included with the set.
- Unique design
- TF card enabled
- Status indicator
- Adjustment function
8. Sunfounder Mega2560 R3 Project Kit
This entire electronic kit is Arduino compatible. Improved to provide learners with a richer learning experience, with 64 input and output components totalling 291 pieces.
To take things to the next level, the SunFounder kit is an excellent choice. Arduino entry-level kits are an excellent way to learn about coding and electronics at a reasonable price. However, its adaptability is relatively constrained, and those eager to learn more may soon wish they had a better option.
Fortunately, they don’t have to spend much money to improve their abilities further. This SunFounder starter set comes with many goodies at a low price.
Measuring more than twice the size of the Arduino UNO, the MEGA2560 board is the basis for this kit. That means that more complex wiring can be used. Makers can create more sophisticated mechanisms by combining elements like an ultrasonic range module, joystick, and tilt switch. Although the kit comes with 40 projects, many more may be created utilizing the internet.
The IDE must be downloaded individually by the user. Although SunFounder supplies some code, the documentation provided by the company does not go into as much detail as it might. In addition, this kit has several issues that may necessitate students to use other internet resources to get the most out of it. Our recommendation for novices is to avoid this kit because of these issues.
- 40 lessons for basic programming
- Overheat monitor
- 18 months warranty
When selecting the best Arduino robotic kit for programming, numerous considerations come into play.
However, due to its ease of assembly and programming flexibility, the Makeblock mBot Robot Kit with DIY mechanical construction blocks is our top pick. It is the buyer’s choice to make on this sensitive topic.